Polycom 330 updating initial configuration chelan county sex offender website

In many cases, this information can also be found on the bottom of the phone albeit printed very small.On Soundpoint IP and Sound Station model press: Menu - Press the menu button or House Icon on your Polycom phone. Enter your password; the default password is '456'. Next, select "Admin Settings" (1), followed by "Network Configuration" (1). Change "Server Type" to "HTTP", and the "Server Address" to boot.onsip.com, using the * key for the periods.The current version of software for most Sound Point IP phones on the boot server is 4.0.8c.For VVX phones, it is 5.5.0 Press "Menu" on your Polycom phone. Enter your password; the default password is '456'. Next, select "Admin Settings", followed by "Network Configuration".The previous article mentioned above contains links with more details on enterprise deployment and management practices.But when trying to update the firmware for a few phones there is a new process which was introduced with the 4.0 release of UCS.Select "Back"/"Exit" (or use the Left directional key) and the "Save Config" option.The reboot process may take up to 30 minutes on older phones, if a firmware upgrade is required.

As of the writing of this article the Lync specific firmware release is not yet included on the Polycom Hosted Server, so primarily Open SIP only firmware releases will be available using this method.

There is still some initial setup required but this is a basic as creating a single XML file and then dropping it an the desired firmware files directly into any web server directory.

For engineers looking to carry phones around to different sites for demonstration purposes then selecting a web server on the Internet makes it very easy to update the phones over the Internet, while for supporting updates for a handful of devices on an internal network then utilizing an existing web server is ideal.

In the "Server Menu", change "Server Type" to HTTP by using the arrow hard keys and Server Address to (Hit the number 2 twice for the letter "b", for example, and the * key for periods.

If you see "22" instead of "b" you are in Number mode and must press the "#" key to change to URL mode.) When done, hit the checkmark hard key to save.

Leave a Reply